CSPOLA600 - Product will not respond to remote control

CSPOLA600 - Product will not respond to remote control

Possible Causes

  1. IR detector is dirty.
  2. Batteries in remote are dead

Suggested Solutions

  1. Clean the IR detector.
  2. Recharge the remote control using the USB cable.
  3. Replace the battery

    • Related Articles

    • CS550 - Product will not respond to remote control

      Possible Causes IR detector is dirty. Batteries in remote are dead Suggested Solutions Clean the IR detector. Recharge the remote control using the USB cable. Replace the battery

    • CSPOLA600 - Software Update V1.0.0.1

      Make sure you have a USB 3.0 THUMB DRIVE. Make sure to use software V1.0.0.1 to update the CSPOLA, to be used with Vision R 800 V1.2.0.1 1. Use the power switch to turn off the unit. 2. Proceed to download file V1.0.0.1.zip and then place it in the ...

    • CSPOLA600 - Why the screen display white?

      Make sure you have a USB 3.0 THUMB DRIVE. Make sure to use software V1.0.0.1 to update the CSPOLA, to be used with Vision R 800 V1.2.0.1 1. Use the power switch to turn off the unit. 2. Proceed to download file V1.0.0.1.zip and then place it in the ...

    • CS550 - Product does not turn on

      Possible Causes Power cable not plugged in No light on power supply Suggested Solutions Unplug and replug the power cable to ensure proper fit. Change power supply

    • CSPOLA600 - Product does not turn on

      Possible Causes Power cable not plugged in No light on power supply Suggested Solutions Unplug and replug the power cable to ensure proper fit. Change power supply