Installation
CSPOLA600 - Configuration with APH550
1. Hold the central button down while pressing the “ON/OFF” button. The monitor comes on. 2. When you hear the beep, remove your finger. The following screen will appears. 3. Go to the tab “Chart”. 4. “BF” corresponds to acuity notation in feet 5. ...
VISIONC600 - Installation
Click here to review unpacking procedure. Different types of wall Wall mount PN: VRSA04 6 to 11 feet apart 1 power source behind the patient at a height of 74 inches. 1 mirror in front of the patient at a height of 64 inches. 2 internet ports behind ...
VISIONC600 - Unpacking Procedure
VISIONC600 - Configuration via network
Cables Connection It is mandatory to update the screen to allow the communication between Vision-R800/700 and Vision-C 600. Settings Configuration & Calibration 1. Go to settings 2. Insert your tech code. 3. Navigate to Ruler and select distances Set ...
VISIONC600 - Hard Connection Types
Infrared Network
VISIONC600 - Configuration via IR
Cables Connections It is mandatory to update the screen to allow the communication between Vision-R800/700 and Vision-C 600. Settings Configuration & Calibration 1. Connect the memory unit USB in any of the indicated USB ports. Refer to the image ...
CSPOLA600 - Wall Bracket Installation Instructions
Below a copy of the CSPOLA600 Wall Mount installation instructions that can be used to prepare the installation site.
CSPOLA600 - Installation
Available configurations for CSPOLA600 CSPOLA600 - Configuration with VisionR800 and VisionR700 CSPOLA600 - Configuration with APH550 CSPOLA600 - Configuration Different types of wall Wall mount ...
CS550 - Wall Bracket Installation Instructions
Below a copy of the CS550 Wall Mount installation instructions that can be used to prepare the installation site.