VISIONC600 - Installation

VISIONC600 - Installation

Click here to review unpacking procedure.

Different types of wall




Wall mount    PN: VRSA04




6 to 11 feet apart

  1. 1 power source behind the patient at a height of 74 inches.
  2. 1 mirror in front of the patient at a height of 64 inches.
  3. 2 internet ports behind the patient.
  4. 1 power source behind the patient.
 



10 to 26 feet apart

  1. 1 power source behind the patient at a height of 16 inches.
  2. 1 power source in front of the patient at a height of 64 inches.
  3. 2 internet ports behind the patient.










    • Related Articles

    • CSPOLA600 - Installation

      Available configurations for CSPOLA600 CSPOLA600 - Configuration with VisionR800 and VisionR700 CSPOLA600 - Configuration with APH550 CSPOLA600 - Configuration Different types of wall Wall mount ...

    • CS550 - Wall Bracket Installation Instructions

      Below a copy of the CS550 Wall Mount installation instructions that can be used to prepare the installation site.

    • CSPOLA600 - Wall Bracket Installation Instructions

      Below a copy of the CSPOLA600 Wall Mount installation instructions that can be used to prepare the installation site.

    • CSPOLA600 - Configuration with APH550

      1. Hold the central button down while pressing the “ON/OFF” button. The monitor comes on. 2. When you hear the beep, remove your finger. The following screen will appears. 3. Go to the tab “Chart”. 4. “BF” corresponds to acuity notation in feet 5. ...

    • VISIONC600 - VisionR700 & VisionR800 keyboard can't control the screen.

      This problem can only occur if the screen VISIONC600 is configured with the VisionR using network method. When the screen VISIONC600 is not available the chart library is disabled. The letter (S) is not showing. Possible reasons 1. Screen VISIONC600 ...