CSPOLA600 - Don’t want the slideshow during sleep mode

CSPOLA600 - Don’t want the slideshow during sleep mode

Possible Causes

  1. Needs to be turned off

Suggested Solutions

In system setup, change the “Slideshow” to “OFF”.
Refer to user manual for instructions.

    • Related Articles

    • CS550 - Don’t want the slideshow during sleep mode

      Possible Causes Needs to be turned off Suggested Solutions In system setup, change the “Slideshow” to “OFF”. Refer to user manual for instructions.

    • CSPOLA600 - Software Update V1.0.0.1

      Make sure you have a USB 3.0 THUMB DRIVE. Make sure to use software V1.0.0.1 to update the CSPOLA, to be used with Vision R 800 V1.2.0.1 1. Use the power switch to turn off the unit. 2. Proceed to download file V1.0.0.1.zip and then place it in the ...

    • CSPOLA600 - Why the screen display white?

      Make sure you have a USB 3.0 THUMB DRIVE. Make sure to use software V1.0.0.1 to update the CSPOLA, to be used with Vision R 800 V1.2.0.1 1. Use the power switch to turn off the unit. 2. Proceed to download file V1.0.0.1.zip and then place it in the ...

    • CSPOLA600 - Configuration with APH550

      1. Hold the central button down while pressing the “ON/OFF” button. The monitor comes on. 2. When you hear the beep, remove your finger. The following screen will appears. 3. Go to the tab “Chart”. 4. “BF” corresponds to acuity notation in feet 5. ...

    • CSPOLA600 - FAQ

      Question Answer What is the size of screen CSPOLA600? 24" POLARIZATION function Can I do glare test? No, glare test is not possible. What is the min-max length for my exam room? recommend min 10ft - max 18 (21' for cpola600) Can I show - upload ...