Cleaning Head Unit - VisionR 800

Wipe the indicated area softly with a dry cloth.  In case of hard stain on the main unit cover, 

wipe it with a damp cloth or neutral cleanser

It is better no to use a spray cleaner directly on the head unit to avoid getting liquid in between the covers.

Avoid using an organic solvent, such as paint thinner. It could permanently damage the water-based paint. 

• Related Articles

• VisionR 800 - AVA - Settings Configuration

  Is recommended to upgrade VisionR-800 to software version 2.6 or latest EMR/EHR Vendor Portal To obtain XML samples, click on the below. https://essibox.support-essilorinstruments.com/ESSILOR/visionr-800 EMR/EHR Vendors ready for AVA : Compulink ...

• Cleaning Keyboard - VisionR 800

  STEP 1 Switch off the console STEP 2 Remove fingerprints smudges with a damp cloth or neutral cleanser, once a day. It is better no to use a spray cleaner to avoid getting liquid in between the buttons. Avoid using organic solvent, such as paint ...

• VisionR 700 - Unpacking & Repacking procedure

  Proceed to open the box of Vision R700. Open the box and remove the phoropter head.Inside the box there are accessories for near vision. Verify that the serial number of head matches the label out side the box. Open the box and remove the keyboard ...

• VisionR 800 - Unpacking & Repacking procedure

  Proceed to open the box of Vision R800. Open the box and remove the phoropter head.Inside the box there are accessories for near vision. Verify that the serial number of head matches the label out side the box. Open the box and remove the keyboard ...

• VisionR Series - Adjusting the level

  Follow this recommendation to manipulate the VisionR STEP 1 Introduce the exam to the patient “This device is the Vision-R® 800. This breakthrough device will enable us to measure your refraction at a 0.01 diopter, the highest level of precision. To ...