Cleaning Keyboard - VisionR 800
STEP 1
Switch off the consoleSTEP 2Remove fingerprints smudges with a damp cloth or neutralcleanser, once a day.
STEP 1 
It is better no to use a spray cleaner to avoid getting liquid in between the buttons.
Avoid using organic solvent, such as paint thinner. It could permanently damage the water-based paint.
Related Articles
VisionR 800 - AVA - Settings Configuration
Is recommended to upgrade VisionR-800 to software version 2.6 or latest EMR/EHR Vendor Portal To obtain XML samples, click on the below. https://essibox.support-essilorinstruments.com/ESSILOR/visionr-800 EMR/EHR Vendors ready for AVA : Compulink ...VisionR/S Series - Unpacking & Repacking procedure Keyboard
Step 1 Open the box and remove the keyboard from the foams Step 2 Remove the foam on each side Remove the plastic bagVisionR 700 - Unpacking & Repacking procedure
Proceed to open the box of Vision R700. Open the box and remove the phoropter head.Inside the box there are accessories for near vision. Verify that the serial number of head matches the label out side the box. Open the box and remove the keyboard ...VisionR 800 - Unpacking & Repacking procedure
Proceed to open the box of Vision R800. Open the box and remove the phoropter head.Inside the box there are accessories for near vision. Verify that the serial number of head matches the label out side the box. Open the box and remove the keyboard ...Cleaning Head Unit - VisionR 800
Wipe the indicated area softly with a dry cloth. In case of hard stain on the main unit cover, wipe it with a damp cloth or neutral cleanser It is better no to use a spray cleaner directly on the head unit to avoid getting liquid in between the ...