VisionR Series - Adjusting the level

VisionR Series - Adjusting the level


Follow this recommendation to manipulate the VisionR 


  STEP 1    Introduce the exam to the patient 




“This device is the Vision-R® 800. This breakthrough device will enable us to measure

your refraction at a 0.01 diopter, the highest level of precision.

To do this, it utilizes a revolutionary autofocus liquid lens and an adaptive smart program. “


STEP 2    Clean the forehead rest & face shields


STEP 3   Place and center the phoropter head in front of the patient’s eyes.
STEP 4   Turn the forehead rest knob in order to adjust the vertex distance






    • Related Articles

    • VisionR 800 - AVA - Settings Configuration

      Is recommended to upgrade VisionR-800 to software version 2.6 or latest EMR/EHR Vendor Portal To obtain XML samples, click on the below. https://essibox.support-essilorinstruments.com/ESSILOR/visionr-800 EMR/EHR Vendors ready for AVA : Compulink ...

    • VisionR Series - Measuring the pd

      STEP 1 Press PD icon on the touch screen. STEP 2 Adjust the Pupillary distance using the dial knob on the console and the centering target (Monocular or Binocular adjustment). If you are struggling to find the PD try to compensate for the PD ...

    • VisionR/S Series - Keys

      Locate each button. 1. Clear Data Short press = Current values reset. Long press = Switch the instrument on/off 2. Import Import patient’s refraction data. 3. Export Export patient’s refraction data 4. Far/Near Vision : Far vision mode (Mountain) ...

    • VisionR 800 - Unpacking & Repacking procedure

      Proceed to open the box of Vision R800. Open the box and remove the phoropter head.Inside the box there are accessories for near vision. Verify that the serial number of head matches the label out side the box. Open the box and remove the keyboard ...

    • VisionR 700 - Unpacking & Repacking procedure

      Proceed to open the box of Vision R700. Open the box and remove the phoropter head inside the box there are accessories for near vision. Verify that the serial number of head matches the label out side the box. Open the box and remove the keyboard ...