VisionR Series - Measuring the pd

VisionR Series - Measuring the pd


STEP 1
Press PD icon on the touch screen. 

STEP 2
Adjust the Pupillary distance using the dial knob on the console and the centering target
(Monocular or Binocular adjustment). 






If you are struggling to find the PD try to compensate for the PD adjustment. Is possible that the head VR700 is not properly aligned.
If the head is not level, adjust it by rotating the adjustment wheel. 



 




“  Do you feel comfortable?

Please look straight ahead at the chart and keep your eyes open as wide as possible. Please blink as needed   ”




    • Related Articles

    • VisionR 800 - AVA - Settings Configuration

      Is recommended to upgrade VisionR-800 to software version 2.6 or latest EMR/EHR Vendor Portal To obtain XML samples, click on the below. https://essibox.support-essilorinstruments.com/ESSILOR/visionr-800 EMR/EHR Vendors ready for AVA : Compulink ...

    • VisionR/S Series - Measuring the Vertex

      STEP 1 Enter the Vertex distance mode " Please look straight ahead and open your eyes. " STEP 2 Adjust the blue line(s) until it is marking the cornea apex on the right and left eyes, using the dial jog. (Monocular or Binocular adjustment). STEP 3 ...

    • VisionR Series - Adjusting the level

      Follow this recommendation to manipulate the VisionR STEP 1 Introduce the exam to the patient “This device is the Vision-R® 800. This breakthrough device will enable us to measure your refraction at a 0.01 diopter, the highest level of precision. To ...

    • VisionR/S Series - Keys

      Locate each button. 1. Clear Data Short press = Current values reset. Long press = Switch the instrument on/off 2. Import Import patient’s refraction data. 3. Export Export patient’s refraction data 4. Far/Near Vision : Far vision mode (Mountain) ...

    • VisionR 700 - Unpacking & Repacking procedure

      Proceed to open the box of Vision R700. Open the box and remove the phoropter head.Inside the box there are accessories for near vision. Verify that the serial number of head matches the label out side the box. Open the box and remove the keyboard ...