VisionR/S Series - Touch Screen

Locate each section and working areas .

             

• Related Articles

• VisionR 800 - AVA - Settings Configuration

  Is recommended to upgrade VisionR-800 to software version 2.6 or latest EMR/EHR Vendor Portal To obtain XML samples, click on the below. https://essibox.support-essilorinstruments.com/ESSILOR/visionr-800 EMR/EHR Vendors ready for AVA : Compulink ...

• VisionR/S Series - Keys

  Locate each button. 1. Clear Data Short press = Current values reset. Long press = Switch the instrument on/off 2. Import Import patient’s refraction data. 3. Export Export patient’s refraction data 4. Far/Near Vision : Far vision mode (Mountain) ...

• VisionR/S Series - Measuring the Vertex

  STEP 1 Enter the Vertex distance mode " Please look straight ahead and open your eyes. " STEP 2 Adjust the blue line(s) until it is marking the cornea apex on the right and left eyes, using the dial jog. (Monocular or Binocular adjustment). STEP 3 ...

• VisionR/S Series - Best Practices to clean keyboard

  Switch the device OFF every evening by holding the upper leftmost button down for several seconds. Switch ON every morning by briefly pressing the upper leftmost button. Clean the Touch screen every evening with a soft microfiber cloth.

• VisionR Series - Adjusting the level

  Follow this recommendation to manipulate the VisionR STEP 1 Introduce the exam to the patient “This device is the Vision-R® 800. This breakthrough device will enable us to measure your refraction at a 0.01 diopter, the highest level of precision. To ...