SL650 & SL650+ Videos Installation Procedures
Software Installation
Chinrest and Base
Digital Camera & Microscope
Cables and Chin Rest
DryEye Module Installation
Share Database between Rooms.
1) Make sure that the 2 PC for the slit lamp are on the same network
2) Obtain the IP Address of the PC1 on which the database is set up and would be the main one
Run an “ipconfig” from a command prompt:
3) Open the Anaeyes SL software on the second PC (PC2)
Click the edit icon to enter the server configuration page.
Edit the IP Server by editing the Server field.
Copy the IP address of the server PC and the port number
Test: press the Test button
> The server status must be green.
Verify Database between Rooms is shared.
1. Enter the application and open the patient list. Make sure it is the same as the Server PC.
2. Create a patient and capture an image on the server PC.
3. Check the patient list on the PC for updates.
Related Articles
SL650+ Videos Installation Procedures - DryEye Suite
Software Installation Click here to Download Anaeyes. (Version with video compressor) DryEye Module Installation Share Database between Rooms. 1) Make sure that the 2 PC for the slit lamp are on the same network 2) Obtain the IP Address of the PC1 on ...
Anaeyes Software Installation Procedure - SL650
Software Installation Click here to Download Anaeyes. (Version with video compressor) Share Database between Rooms. 1) Make sure that the 2 PC for the slit lamp are on the same network 2) Obtain the IP Address of the PC1 on which the database is set ...
DS 550 Digital Camera for SL 500L / SL 550L - FAQ
Q: Does this camera compatible to all SL? A: No, only to Essilor SL500L and SL550L Q: Does it do Picture and Video? A: Yes it can do both Q: How many megapixels is the camera? A: The camera is 2MP Q: Can we do progression reports? A: yes, the DR. is ...
SL 350 / SL 450 Slit Lamps - FAQ
ISSUE CAUSE SOLUTION No illumination The cable isn't connected correctly with the power socket Connect the power cable correctly The main power switch is on "O" position Place the switch on "I" position The plug on the power box is loosen Insert the ...
SL500 & SL550 - Installation Procedure with DS550
Step 1 Locate the part ARM005 or 1040X the Installation_Pattern and TABTOP03 Step 2 Place the Installation_Pattern on the surface of the table and align it with the center. Make sure to flush the line with the edge of the table. Step 3 Use scotch ...