PS 500 Portable Slit Lamp

PS 500 Portable Slit Lamp


    • Related Articles

    • SL 350 / SL 450 Slit Lamps - FAQ

      ISSUE CAUSE SOLUTION No illumination The cable isn't connected correctly with the power socket Connect the power cable correctly The main power switch is on "O" position Place the switch on "I" position The plug on the power box is loosen Insert the ...

    • SL 500L / SL 550L Digital Slit Lamp - FAQ

      ISSUE CAUSE SOLUTION green LED always on powered base. powered LEDholder. White light emission. Fault-free operation Red LED continuously ON or White LED always OFF White power LED in the LED-holder is not powered or maximum operating temperature was ...

    • SL650 & SL650+ - Slit width closes automatically

      Problem cause: Slit width closes automatically Causes: The slit width control knob is too loose. Contact support for repair

    • SL650 & SL650+ - Slit is too dark

      Problem cause: Slit is too dark Causes: Voltage selector is wrongly set The coat of the reflecting mirror is oxidized Too much dust on the reflecting surface

    • DAT 5OO R-T-Z Applanation Tonometer

      Screws needed to mount the pin adaptor SL3TMZ and SL209 M3-0.5 x 16 mm or M3-0.5 x 12 mm Tonometer Type R This tonometer is intended to be frequently used. Characteristics of assembly: stationary, it can be moved when it is not used, mounted above ...