CP550 - User Manual

• Related Articles

• CS550 - User Manual

  Link for download here

• CSPOLA600 - User Manual

• VISIONC600 - User Manual

• CP 550 - FAQ

  ISSUE CAUSE SOLUTION Customer complaints about calibration. The projector is not at a correct distance Make sure the projector is a between range 2m to 7m The lamp does not light up when the main switch (7) is turned on. Poor connection of the power ...

• CSPOLA600 - Don’t want the slideshow during sleep mode

  Possible Causes Needs to be turned off Suggested Solutions In system setup, change the “Slideshow” to “OFF”. Refer to user manual for instructions.