Adjust the position of the bevel and groove

After beveling a lens, if the position of the bevel or groove appears to be systematically too forward or

backwards, you can adjust it.

To access this menu on the beveling machine's work screen, select:

The following screen is displayed:

1 - Bevel position

Press (+) to move the bevel to the outer side of the lens.

Press ( - ) to move the bevel towards the inner face.

2 - Position of polished bevel

Press (+) to move the polished bevel to the outer side of the lens.

Press ( - ) to move the polished bevel to the inner face.

3 - Slot position

Press (+) to move the slot to the outer side of the lens.

Press ( - ) to move the slot to the inner face.

Once the modification is introduced, press red arrow to return to the work screen.

Note: Polished bevel and bevel settings should always be changed equally.

Example: by changing the bevel value of 0.03 to 0.05 (+0.02) we must change the polished bevel value from 0.00 to 0.02 (+0.02)

• Related Articles

• Adjust the shape axis position

  Principle This adjustment allows you to set the shape axis position in relation to the 22mm or 18-14mm posiblock Reminders Shape axis position adjustment condition •After wheel calibration, If the shapes are cut off-axis. For each material, carry out ...

• Error Codes_B21-B41_L11-L12-L13-L14-L20_M22-M24-M25

  Opt 1 Please contact your technician with the product data. Opt 1000 Opt 1001 Internal error. Please contact your support technician.+48 Opt 1002 Unforeseen error. Please contact your support technician. Opt 1003 No internal memory. Please contact ...